Views:68 Author:Site Editor Publish Time: 2020-09-07 Origin:Site
Under the influence of various uncertain factors, no matter how good the quality wooden door is, it is inevitable to get some injuries. So today I will introduce some ways to deal with the "injury" of the wooden door. I hope it can be helpful.
1. Treatment of scratches on wooden doors
If the wooden door is accidentally scratched, but the wood below the paint film is not touched, a soft cloth can be moistened with a little melted wax liquid and apply to the paint film wound to cover the scar. After the wax hardens, apply another one. Repeat this application several times to cover up the film scars.
2. In addition to the ink marks on the wooden door
Add two parts of white vinegar to one part of water, wipe the ink traces on the wooden door with a sponge dipped in the mixture, and then wash and dry it.
3. Remove water marks
Water marks usually disappear after a period of time. If it is still visible after one month, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water mark in the direction of the wood grain. Or you can cover the mark with a damp cloth, and then use an electric iron to carefully press the damp cloth several times to reduce the mark.
4. Remove oil stains on wooden doors
Residual tea is an excellent cleaning agent. After wiping, spray a small amount of corn flour to wipe it, and finally wipe the corn flour. Corn flour can absorb all the dirt adsorbed on the surface of the wooden door, making the paint smooth and bright.
5. Treatment of white or light-colored wooden doors turning yellow
The white or light-colored paint on the surface of the wooden door will change color over time. You can use a cloth dipped in toothpaste to wipe it.
6. Protect hardware decorations
Just wipe gently with a dry cloth, do not use cleaning agents containing chemicals.
7. Remove the stuck paper
Soak the paper completely with salad oil, and rub it lightly in the direction of the wood grain with special steel wool for wooden doors after a few minutes. Polish after drying.
8. Reduce burn marks
Cigarette butts or unextinguished matches leave scorch marks on the paint surface of the wooden door. If the paint surface is burnt, you can wrap a fine-grained hard cloth on the matchstick or toothpick, gently wipe the marks, and then apply a thin layer of wax to make the scorch marks It can be faded.
If the lacquer surface of the wooden door is scratched and the wood under the lacquer is not touched, use crayons or paints of the same color as the wooden door to paint on the wound surface of the wooden door to cover the exposed background color, and then apply a thin layer of transparent nail polish.
10. Removal of styrofoam
Excess styrofoam on the surface of the solid wood door is a common occurrence during the installation of the solid wood door. Once you accidentally get the styrofoam on the surface of the wooden door, remember not to wipe the styrofoam off immediately. Regardless of it, after the styrofoam is completely cured, just pull it down with your hand, and it won't leave obvious marks. Otherwise, the more you rub it, the stickiness is everywhere and it's messed up.