How to clean color stainless steel doors?

The "character" of various material doors in the market is compared with stainless steel doors, and with the use of color stainless steel doors more and more widely. Consumers are getting more and more headaches about the cleaning of color stainless steel doors. So, how to clean color stainless steel doors?

The first case: If only dirt is attached to the surface of the door, wipe it with dish soap. But it should be noted that the material of the stainless steel door is mirror or brushed. If the mirror is mirrored, special attention should be paid to the cleaning tools. The rag must be clean and dust-free. In addition, there are special cleaning agents for stainless steel cleaning, called stainless steel cleaning agents or stainless steel brighteners, and special care agents, including stainless steel oil, can remove stains and restore the brightness of stainless steel.

The second case: If you want to remove the trademark or film tape traces on the door, you can wipe it with warm water and then wipe it with alcohol.

The third case: If there is dirt such as oil stains on the surface, you can directly wipe it with a soft cloth, and then clean it with ammonia solution.

The fourth case: If there are bleaching agents and various acids on the surface of the color stainless steel door, you can immediately rinse with water, then use neutral carbonated soda water to clean, and then rinse with water.

The fifth situation: There are rainbow patterns on the surface of the door. It may be caused by too much oil or detergent. Clean it with warm water.

The sixth situation: If the surface is rusty, it can be cleaned with 10% nitric acid or a special maintenance solution, and then painted with a similar color to make it difficult to see from a 1 meter outside view.

The seventh case: If there are stubborn stains on the surface, you can use a radish or cucumber stalk to moisten the detergent and wipe it vigorously. Do not use a steel wire ball, which will cause serious damage to the door.

In addition, after the color stainless steel door is installed, tear off the protective film within one week. Otherwise, the protective film will not be torn off or it will be difficult to tear off the protective film after wind and sun.